Details: Size - Cutting diameter: 8.9mm / 0.35"; accuracy class: H7; cutting flute length: 15mm / 0.59"; shank diameter: 10mm / 0.39"; 100mm / 3.94"; cutting direction: right handMaterial - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average cobalt content of 6%, high hardness, good toughness, wear resistance, high heat resistance, and anti-sticking. Carbide can run at higher speed than high-speed steel.Features - Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or holes without interruption, such as keyways.Applications - Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc.. Great for light cut, repair work, or simply for enlarging holes.Notes - Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use. Should held in a good-quality toolholder.- C1/K30 Tungsten Carbide is a tungsten-cobalt carbide with an average cobalt content of 6%. Carbide tip has high hardness, good toughness, wear resistance, high heat resistance, and anti-sticking. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Straight flute reamers allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. Suitable for use in through holes or holes without interruption, such as keyways. Designed with the base substrate without any coatings, good for general purpose applications.
- Widely used for processing, and bore machining. Designed for accurate reaming in stainless steel, aluminum, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc.. Great for light cut, repair work, or simply for enlarging holes.
- Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers. Always keep reamers clean, and used with machine oil for long service use.
- Notice: Should held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications. Can be used with a wide variety of tool holding systems.
Country of Origin: China |
